A worm gear set is considered to be self-locking, or irreversible gear when it cannot be worms. If this condition is established that the angle of the leading bug is smaller than the friction angle, the driving efficiency for reverse driving is zero. Factors such as the angle of friction under static conditions will change and the surface finish and lubrication. Generally accepted value base

Most synthetic lubricants have lower pour point, high vibration resistance, and accept additives than conventional oil and gas equivalents. Therefore, a gearbox under one of the following conditions will benefit from the use of artificial lubricants: hot or cold ambient temperature; they carry an unbearable burden; continuous responsibility; or limited points.

Some of the most common reasons include failure of the reducer selected for the application, changing the motor horsepower or speed, incorrectly aligning the joints, improper operation or insufficient lubrication, and lack of regular maintenance and repairs.

The position on the output shaft relative to its reducer input shaft is called the configured hand. This is generally called right-handed (J), left-handed tendencies (G) or left and right-handed (H) if the output shaft is double extended.

When do you use helical gear reducers and worm gear reducers?

Some of the advantages are: Hardening and grinding gears 1. Noise 2. Maximum efficiency 3. Higher load capacity 4. Curved... Longer service life