Product Center
Product Center
img

PRODUCT CENTER

Gear reducer is suitable for mechanical tools to set different speeds and different processing requirements. Common types of gear reducers use pulley pairs of different diameters, gearboxes, and reinforced electric motors. The most common reducer includes: worm gear reducer, bevel gear reducer, spiral gear reducer, parallel shaft gear reducer, etc... welcome to inquire!

搜索
Search

RV Series

1. compact mechanical structure, light size, small and efficient. 2. good heat exchange performance, fast heat dissipation. 3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability 6. can withstand large radial load. 7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150) 8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface 9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron 10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK. 11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters: Product specification: 25~150 Transmission speed ratio: 7.5~100 Input power: 0.06~15KW Output torque: 2.6~3057N.m
imgBox
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters:

Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient. 2. good heat exchange performance, fast heat dissipation. 3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability 6. can withstand large radial load. 7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150) 8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface 9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron 10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK. 11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters. Product specification: 25~150 Transmission speed ratio: 7.5~100 Input power: 0.06~15KW Output torque: 2.6~3057N.m
imgBox
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient. 2. good heat exchange performance, fast heat dissipation. 3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability 6. can withstand large radial load. 7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150) 8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface 9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron 10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK. 11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters. Product specification: 25~150 Transmission speed ratio: 7.5~100 Input power: 0.06~15KW Output torque: 2.6~3057N.m
imgBox
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient. 2. good heat exchange performance, fast heat dissipation. 3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability 6. can withstand large radial load. 7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150) 8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface 9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron 10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK. 11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters. Product specification: 25~150 Transmission speed ratio: 7.5~100 Input power: 0.06~15KW Output torque: 2.6~3057N.m
imgBox
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient. 2. good heat exchange performance, fast heat dissipation. 3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability 6. can withstand large radial load. 7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150) 8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface 9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron 10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK. 11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters. Product specification: 25~150 Transmission speed ratio: 7.5~100 Input power: 0.06~15KW Output torque: 2.6~3057N.m
imgBox
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m

VF Series

1. Compact mechanical structure, light volume, small and efficient. 2. Good heat exchange performance, fast heat dissipation. 3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. Large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. stable operation, low noise, durable. 6. Strong adaptability, high safety and reliability. 7. can withstand large radial load. 8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150) 9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface. 10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron. 11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK. 12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters. Product specification: 30 ~ 150 Transmission speed ratio: 7 ~100 Input power: 0.04~15KW Output torque: 2~3057N.m
imgBox
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters.
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient. 2. Good heat exchange performance, fast heat dissipation. 3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. Large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. stable operation, low noise, durable. 6. Strong adaptability, high safety and reliability. 7. can withstand large radial load. 8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150) 9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface. 10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron. 11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK. 12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.   Product parameters: Product specification: 30 ~ 150 Transmission speed ratio: 7 ~100 Input power: 0.04~15KW Output torque: 2~3057N.m
imgBox
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

 

Product parameters:

Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient. 2. Good heat exchange performance, fast heat dissipation. 3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. Large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. stable operation, low noise, durable. 6. Strong adaptability, high safety and reliability. 7. can withstand large radial load. 8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150) 9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface. 10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron. 11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK. 12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters: Product specification: 30 ~ 150 Transmission speed ratio: 7 ~100 Input power: 0.04~15KW Output torque: 2~3057N.m
imgBox
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters:
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient. 2. Good heat exchange performance, fast heat dissipation. 3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. Large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. stable operation, low noise, durable. 6. Strong adaptability, high safety and reliability. 7. can withstand large radial load. 8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150) 9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface. 10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron. 11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK. 12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters: Product specification: 30 ~ 150 Transmission speed ratio: 7 ~100 Input power: 0.04~15KW Output torque: 2~3057N.m
imgBox
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters:
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient. 2. Good heat exchange performance, fast heat dissipation. 3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. Large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. stable operation, low noise, durable. 6. Strong adaptability, high safety and reliability. 7. can withstand large radial load. 8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150) 9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface. 10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron. 11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK. 12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters: Product specification: 30 ~ 150 Transmission speed ratio: 7 ~100 Input power: 0.04~15KW Output torque: 2~3057N.m
imgBox
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters:
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient. 2. Good heat exchange performance, fast heat dissipation. 3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. Large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. stable operation, low noise, durable. 6. Strong adaptability, high safety and reliability. 7. can withstand large radial load. 8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150) 9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface. 10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron. 11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK. 12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters: Product specification: 30 ~ 150 Transmission speed ratio: 7 ~100 Input power: 0.04~15KW Output torque: 2~3057N.m
imgBox
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters:

Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient. 2. Good heat exchange performance, fast heat dissipation. 3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair. 4. Large transmission speed ratio, high torque, high overload capacity and impact resistance. 5. stable operation, low noise, durable. 6. Strong adaptability, high safety and reliability. 7. can withstand large radial load. 8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150) 9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface. 10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron. 11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK. 12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end. Product parameters: Product specification: 30 ~ 150 Transmission speed ratio: 7 ~100 Input power: 0.04~15KW Output torque: 2~3057N.m
imgBox
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.

Product parameters:
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
Leave us a message
Username used for comment:
客户留言
Description:
Business contact:

Contact information

Address: Xingye North Road, Nanhai Economic Development Zone (Beiyuan), Shishan town, Nanhai District, Foshan City
Zip code: 528225 
Tel:
+86-18929924201(Manager Tang)
Fax: 86-757-86717052    86783598 

Email:       ex-sale@qiangzhu.cn
Wesite: https://en.qiangzhu.cn/

2021©FOSHAN NANHAI ZHUJIANG REDUCTION GEAR CO.,LTD 粤ICP备14068792号    www.300.cn

LISTEN TO THE VOICE OF EVERY CUSTOMER

留言应用名称:
客户留言
描述:
验证码