Product Center
Product Center
PRODUCT CENTER
Gear reducer is suitable for mechanical tools to set different speeds and different processing requirements. Common types of gear reducers use pulley pairs of different diameters, gearboxes, and reinforced electric motors. The most common reducer includes: worm gear reducer, bevel gear reducer, spiral gear reducer, parallel shaft gear reducer, etc... welcome to inquire!
搜索
RV/VF series
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. compact mechanical structure, light size, small and efficient.
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
2. good heat exchange performance, fast heat dissipation.
3. installation form: installation position is not restricted; easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. smooth running, low noise, durable; 7. strong adaptability, high safety and reliability
6. can withstand large radial load.
7. the box is made of high quality aluminum alloy (025-105) and cast iron (110-150)
8. the worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface
9. the worm wheel is made of cast copper with high wear resistance, and the hub is made of ductile iron
10. bearings: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearings NSK.
11. oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 25~150
Transmission speed ratio: 7.5~100
Input power: 0.06~15KW
Output torque: 2.6~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters.
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
1. Compact mechanical structure, light volume, small and efficient.
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
2. Good heat exchange performance, fast heat dissipation.
3. Installation form: installation position is not restricted. Easy installation, flexible coupling type, superior performance, easy maintenance and repair.
4. Large transmission speed ratio, high torque, high overload capacity and impact resistance.
5. stable operation, low noise, durable.
6. Strong adaptability, high safety and reliability.
7. can withstand large radial load.
8. The box is made of high quality aluminum alloy (30-72) and cast iron (86-150)
9. The worm gear is made of 20CrMnTi, carburized and quenched as a whole and finely ground tooth surface.
10. the worm wheel is made of cast copper with strong wear resistance, and the hub is made of ductile iron.
11. Bearing: mainly adopt domestic famous brand Renben C&U, partly adopt Japanese imported bearing NSK.
12. Oil seal: SKF oil seal is used at the input end, and Taiwan NAK oil seal is used at the output end.
Product parameters：
Product specification: 30 ~ 150
Transmission speed ratio: 7 ~100
Input power: 0.04~15KW
Output torque: 2~3057N.m
Search
×
Leave us a message
客户留言
Description:
WeChat official account
Business contact:
Email: ex-sale@qiangzhu.cn
Contact information
Address: Xingye North Road, Nanhai Economic Development Zone (Beiyuan), Shishan town, Nanhai District, Foshan City
Zip code： 528225
Tel： +86-18929924201(Manager Tang)
Fax： 86-757-86717052 86783598
Email: ex-sale@qiangzhu.cn
Wesite： https://en.qiangzhu.cn/
2021©FOSHAN NANHAI ZHUJIANG REDUCTION GEAR CO.,LTD 粤ICP备14068792号 www.300.cn
LISTEN TO THE VOICE OF EVERY CUSTOMER
客户留言
描述：