helical gear reducer

Helical gear reducer is a common mechanical transmission device that uses helical gear transmission to achieve deceleration and increase torque. Helical gear reducer usually consists of input shaft, output shaft, helical gear set, casing and other parts. Helical gear reducers are widely used in equipment that require stable transmission, low noise, long life and high efficiency, such as medical equipment, food processing machinery, packaging machinery, mixing equipment, etc.

F series parallel shaft helical gear reducer motor

1. Highly modular design: can be easily equipped with various types of motors or other power inputs. The same type of model can be equipped with a variety of power motors. Easy to realize the combination connection between various models Transmission ratio: fine division and wide range. Combined models can form a large transmission ratio, i.e., output very low speed. 2. 2. Long service life: Under the condition of correct selection (including the selection of appropriate use factor) and normal use and maintenance, the life of the main parts of the reducer (except wearing parts) is generally not less than 25,000 hours. The wearing parts include lubricant, oil seal and bearing. 3. 3. Low noise: The main parts of the reducer are precision processed and carefully assembled and tested, so the noise of the reducer is low. 4. High efficiency: The efficiency of gear reducer can reach 95%, and the efficiency of worm gear can reach 89%. 5. It can bear large radial load. 6. High strength and small size: The box body is made of high strength cast iron. Gears and gear shafts adopt gas carburizing quenching and fine grinding process, thus high bearing capacity per unit volume. Gears: material performance is not less than low carbon alloy steel 20CrMnTi; the blank is precision forged; the whole carburized and quenched and finely ground tooth surface, tested by gear testing center, the accuracy level is not less than GB10095-88 grade 6. Output shaft: material performance not less than 45# steel; overall quenching treatment, high-frequency quenching treatment of the oil seal position to ensure that the shaft is not easy to wear; all mating position using grinding technology. Bearings: mainly adopt domestic famous brand C&U, partly adopt imported bearing NSK.  oil seal: input end adopts SKF oil seal, output end adopts NAK oil seal Product parameters: Product specification: 37-157 Transmission ratio: 3.77-31434 Input power: 0.12-200KW Output torque: 3.5-18000N.m

K/S/R/F series helical gear reducer

The reducer is suitable for mining and metallurgy, lifting and transportation, building materials, petrochemicals, glass ceramics, light industry and textiles, food packaging, electronic instruments, plastics and rubber, woodworking and papermaking, energy and environmental protection and other machinery supporting